VGKAMI
Advertise Get listed

Game Guides

Dark Video Game Settings: Balance HDR, Shadow Detail, and Accessibility

Published 11 min read

For dark, spooky games, start with your display and platform—not a universal brightness or gamma number. Confirm that the screen supports HDR, set up HDR appropriately for your system, calibrate the display in the room where you play, then adjust the game only enough to reveal useful shadow detail without flattening the darkness. Check the game’s own accessibility menu separately for motion, flashing, text, contrast, captions, and control options.

The right settings depend on the specific display, console or PC, and game. The steps below draw on official platform and publisher guidance; they are not hands-on test results, and a setting available in one game is not guaranteed to exist in another.

Why can a dark game look too dark?

A shadow that appears completely black can be an intentional part of a scene, but a display or HDR setup can also obscure details the game is meant to show. Raising brightness indiscriminately may reveal more of the image while making darkness look gray, weakening contrast and atmosphere. The goal is not to make every corner bright: it is to retain the distinction between intentional darkness and objects or paths that should be visible.

Several layers affect the image: the game’s rendering and brightness controls, the console or computer’s video-output settings, the display’s own capabilities and controls, and the lighting in the room. A change at one layer does not necessarily correct another. For example, an in-game slider cannot make a non-HDR display reproduce HDR, and a display setting may affect every game rather than one title.

Microsoft’s HDR guidance calls out both the darkest visible detail and the brightest visible detail as calibration concerns. It also warns that very low brightness and some HDR/SDR brightness choices can make dark detail hard to see. Microsoft notes that brightness controls do not behave identically on external monitors and laptop displays, so a value that suits one screen is not a reliable preset for another.

What should I check before changing settings?

Use the lighting conditions in which you actually play, and check which display is selected if you have more than one connected. Look up whether that screen supports HDR, then confirm that the platform and the particular game can output it. HDR is conditional: it is not automatically better for every screen, title, or configuration.

  • Room lighting: Calibrate in your normal playing environment rather than changing the room after calibration. Ambient light changes how easily you perceive near-black detail.
  • Display support: Verify HDR capability instead of assuming that a console, PC, or HDR option alone guarantees HDR on the screen.
  • Game support: Check the game’s own display or video settings. System HDR output and the game’s brightness control are separate choices.
  • Current picture settings: If the display has a control for dark areas, treat it as a cautious adjustment rather than a substitute for calibration. Samsung documents a Black Equalizer control on its Odyssey G5 G55H; that establishes the control’s availability on that model, not that any particular level is accurate or right for every game.

How do I set up HDR on Windows 11?

On Windows 11, select the HDR-capable display, enable HDR in Windows, and run Windows HDR Calibration on that display. Microsoft’s app uses three patterns to address the darkest visible detail, the brightest visible detail, and the display’s maximum brightness; follow the on-screen instructions instead of copying a numeric setting from another screen.

  1. Open Settings > System > Display and select the display you intend to use for the game.
  2. Open HDR and turn HDR on for that display if it supports HDR.
  3. Launch Windows HDR Calibration in full-screen on the same display. Work through its patterns for dark detail, bright detail, and maximum display brightness.
  4. Open the game and use its own calibration or brightness control, if available, to check a representative dark scene.

Windows HDR Calibration is documented for Windows 11; do not treat it as a generic calibration route for every computer or operating system. NVIDIA separately warns that, in the configuration its guidance describes, starting HDR content while Windows HDR is off can produce incorrect, dim, or desaturated output. If an HDR game looks unexpectedly dim or washed out, check Windows HDR before compensating with a large in-game brightness increase.

Which HDR option should I choose on PS5?

PS5 offers a choice that changes how non-HDR content is output. If you want non-HDR games and other content to remain in SDR, choose On When Supported; Always On converts SDR content to HDR output. Neither setting removes the need to calibrate the display and check an individual game’s brightness separately.

  1. Open Settings > Screen and Video > Video Output > HDR.
  2. Select On When Supported if you want HDR output only when supported content is playing. Choose Always On only if you want the console to convert SDR content to HDR output as well.
  3. Go to Video Output > Adjust HDR and follow the calibration screens for your display.
  4. Launch the game and use its own brightness or display calibration, if offered, after the system-level adjustment.

PlayStation describes HDR as offering a higher contrast, or larger color and brightness range, than SDR. That describes the format; it does not establish that every game looks better with HDR enabled or that one PS5 HDR mode is best for every viewer.

How do I see enemies without washing out the blacks?

First complete the platform and display setup, then inspect a scene that contains both dark areas and objects you should be able to distinguish. Adjust the game’s calibration gradually. Aim to reveal the intended details near black while keeping the scene’s dark areas dark; avoid using a large brightness increase as the first response to lost shadow detail.

This is a practical inference from Microsoft’s calibration guidance, not a measured setting for any particular game. A display’s optional dark-area control may be worth a cautious trial if shadow details remain difficult to distinguish, but change one control at a time and revisit the same scene. If more detail appears only because the whole image has become gray, the change may have traded away contrast rather than corrected the underlying setup.

When an image still looks wrong, check in this order: whether HDR is supported by the selected display; whether the operating system or console is set as intended; whether the display was calibrated in normal viewing conditions; and whether the game has its own calibration screen. This helps distinguish a system-level mismatch from a title-specific brightness choice.

Should I choose performance mode or quality mode?

There is no universal choice: performance mode generally prioritizes smoother presentation, while quality mode prioritizes graphics quality, and availability varies by game and hardware. If camera movement or frame pacing feels uncomfortable, try a supported performance option; if visual effects and detail matter more, compare the quality option in that game.

PS5 describes its Performance Mode as prioritizing smoother gameplay and its Resolution Mode as prioritizing graphics quality, with support varying by title. Remedy’s Alan Wake 2 FAQ confirms that the game offers quality and performance choices on PS5 and Xbox Series X, but not a performance mode on Xbox Series S. The same title therefore does not expose identical choices across all consoles.

For PS5 Pro, Remedy’s 2024 update describes Alan Wake 2 Quality mode as targeting 30 fps with ray tracing and Performance mode as targeting 60 fps. Those are publisher-stated mode targets for that platform, not independently measured frame rates, not promises for other platforms, and not universal recommendations. Treat them as an example of the trade-off a specific game presents rather than a benchmark for dark games as a category.

Which accessibility settings should I inspect?

Look in the game’s accessibility menu as well as its display, audio, and control menus. These settings can have separate scopes: a console-level option may change the system interface or supported content without changing a game’s camera, captions, or visual effects.

Motion and camera effects

Check for separate controls for motion blur, camera shake or sway, and a persistent center dot or reticle. Santa Monica Studio documents these as individual options in God of War Ragnarök; this is an example of what one game offers, not evidence that every horror or spooky game includes the same controls. If motion makes play uncomfortable, change one setting at a time and see whether it addresses the specific effect.

PS5 also documents a system-level Reduce Motion control for movement on the console display. Do not assume that it is a universal switch for camera shake inside every game; look for an in-game option for that.

Flashing effects

Check the specific game’s accessibility options and warnings for a reduced-flashing control. Santa Monica Studio documents a Reduced Flashing option in God of War Ragnarök, but its presence there does not establish availability elsewhere. A color filter or HDR selection should not be treated as a way to remove flashing or prevent a medical event.

Subtitles, captions, and navigation cues

Inspect whether the game lets you change subtitle size or background, identify speakers, show captions for non-dialogue sounds, or add directional indicators. These can be distinct controls rather than one general subtitle switch. Santa Monica Studio documents such separable options, and PS5 game presets offer subtitles in supported games.

Console closed-caption settings for supported media are not a guarantee of captions in every game. PS5 and Xbox document system caption controls for supported media, so check the individual game’s options when you need dialogue or sound cues represented on screen.

Text, contrast, and color distinctions

Try text sizing, high contrast, color correction, zoom, or magnification against the actual menus and gameplay, where those options are available. A system-level change may not affect a game in the way you expect: PS5 says that Invert Colours disables HDR, while Xbox describes its system high-contrast option specifically for navigating built-in apps. Check for a separate in-game high-contrast setting rather than assuming a console option changes the game world.

Physical control access

Players who also need adaptable physical input can consider the Xbox Adaptive Controller. Microsoft says it supports Xbox consoles and Windows PC gaming and accepts remappable external inputs. It addresses control access, not dark-scene visibility, so keep input adaptations separate from display adjustments.

What should I compare when choosing settings in a specific game?

Use the game and platform you actually have rather than relying on a universal “best settings” list. Compare a few meaningful factors, then keep the option that meets your needs without solving one problem by creating another.

What to compare Question to ask Why it matters
HDR support Does this display and game support HDR, and is the platform output configured accordingly? HDR depends on the display, platform, and content; an HDR label alone does not guarantee a suitable result.
Near-black detail Can I distinguish intended objects in a dark scene without making the entire image gray? Useful shadow detail matters more than maximizing brightness.
Smoothness and effects Does the game offer performance and quality choices on this hardware? Options differ by title and platform; performance and graphics quality involve a trade-off.
Accessibility scope Is the setting in the game or in the console interface, and what does it affect? System settings for media or menus do not guarantee equivalent changes inside a game.
Specific option availability Does this title actually offer the motion, flashing, text, contrast, or caption control I need? Options documented in one game are examples, not universal features.

Remedy’s Alan Wake 2 FAQ confirms HDR, FSR2, and DLSS support, alongside different console quality and performance choices. Those are title-specific capabilities; they do not establish that every game supports the same rendering technologies or that a particular option is available on every platform.

What settings should I change first if the picture still looks wrong?

Work from the broadest cause to the narrowest: display support and platform output first, display calibration next, and the game’s own settings after that. Changing several controls at once makes it harder to tell whether you have improved near-black visibility or simply changed the overall image.

  1. Confirm the selected display. On a PC with more than one screen, verify that HDR is enabled for the screen running the game. Confirm that the screen itself supports HDR.
  2. Check system HDR output. On Windows 11, confirm the selected display’s HDR setting. On PS5, review whether HDR is set to On When Supported or Always On, based on whether you want SDR content converted.
  3. Calibrate for the room. Use the Windows HDR Calibration app on Windows 11 or Adjust HDR on PS5, as applicable, in the lighting conditions where you normally play.
  4. Revisit one dark scene. Look for intended objects near black and make gradual adjustments in the game’s calibration menu, if it has one.
  5. Separate image quality from comfort. If movement or flashes are the problem, inspect the relevant accessibility options instead of using brightness or HDR to address them.

There is no evidence-based universal gamma, brightness, peak-nit, or frame-rate preset for dark games. Displays, implementations, and player needs differ, and a setting that helps one issue can make another worse.

Frequently Asked Questions

Why does a laptop screen behave differently from my external monitor?

Microsoft notes that laptop and external-display brightness controls do not behave identically, so the same slider position is not a reliable cross-display setting. Calibrate each display you use rather than carrying over a value.

Does PS5 Invert Colours work with HDR?

PlayStation says Invert Colours disables HDR. If you rely on that accessibility feature, account for the change in output rather than assuming HDR remains active.

Can a console’s closed captions show dialogue in every game?

No. PS5 and Xbox document closed-caption controls for supported media, but that does not guarantee game captions. Check the specific game for subtitles and sound-caption options.

Can I use the same Alan Wake 2 frame-rate target on every console?

No. Remedy’s 30-fps and 60-fps figures refer to its PS5 Pro mode descriptions in a 2024 update, not other platforms. Mode availability also differs between Xbox Series X and Series S.