To use these features on an Xbox console, connect wired USB keyboard and mouse, verify that your specific game supports mouse-and-keyboard input, then configure video from Settings > General > TV & display options. In 4K TV details, check what the console actually detects before selecting 120 Hz under Refresh rate or enabling Allow Variable Refresh Rate under Video modes. A 120 Hz output is not a guarantee that a game renders at 120 frames per second, and VRR cannot make a 60 Hz-only display support 120 Hz. Your display model, HDMI input, cable, receiver or switch, and firmware all affect which options appear.
What do you need before changing Xbox settings?
Start by identifying three separate requirements: the input devices, the game, and the display connection. Xbox documents wired USB mice and keyboards for navigation in select games and apps and for getting around the console with a keyboard. That does not mean every Xbox game accepts mouse input, and a keyboard that works for menus does not prove that mouse gameplay is available. See Xbox’s accessibility guidance for the supported-use qualification: Xbox accessibility features.
- Console: Use a wired USB keyboard and, if needed, a wired USB mouse connected directly to the Xbox.
- Game or app: Check the title’s own documentation or in-game controls. Support is selective rather than universal.
- Display path: Confirm the TV or monitor’s exact model, HDMI input, firmware, and any enhanced-input setting.
- Cable and routing: For Xbox Series X, begin with the supplied Ultra High Speed HDMI cable and a direct console-to-display connection.
Do not use cloud-game compatibility as proof of console-game compatibility. Xbox’s cloud instructions involve signing in at xbox.com/play in Edge or Chrome and choosing a title that supports mouse and keyboard; that is a different setup from a locally installed console game. Xbox reported more than 190 cloud games with mouse-and-keyboard support in April 2026, but that dated cloud figure is not a count of compatible Xbox console games. The same update listed more than 260 cloud games with touch controls; touch support is a separate feature and says nothing about keyboard-and-mouse support.
Before buying anything, write down the exact console model, the display model and the HDMI port in use. Also note whether an AV receiver, soundbar, splitter or switch sits between the console and display. This simple inventory prevents a common mistake: changing a console setting when the limitation is actually a particular input or intermediate device.
How do you connect a keyboard and mouse to Xbox?
Connect the wired USB keyboard and mouse to the console’s USB ports, then open a game or app that explicitly supports those devices. The keyboard may also help you navigate Xbox. Mouse-and-keyboard gameplay appears only where the individual title or app implements it.
- Plug the keyboard into a USB port on the Xbox. If you intend to play with a mouse, plug the wired USB mouse into another port.
- Wait for the console to recognize the devices. If a device is not detected, disconnect it, try another USB port, and reconnect it while the console is awake.
- Launch the supported game or app and open its controls or input settings. Select keyboard and mouse controls if the title provides that option.
- Test the controls in a safe menu, tutorial, or practice area before entering a competitive match.
Xbox’s official wording is deliberately limited to wired USB devices and select games and apps. Avoid assuming that a Bluetooth-only keyboard, a wireless receiver, or an unsupported title will work in the same way. The exact current Xbox paths for detailed mouse-speed and keyboard-layout controls are not established by the cited documentation, so use the game’s own controls menu rather than relying on a universal console menu path.
A keyboard being visible to the dashboard is only a navigation test. To verify gameplay, look for a mouse-and-keyboard option in the title’s control screen and test both devices separately. Some games may accept keyboard commands but not mouse aiming; others may enable the devices only after a match or profile is loaded. If the game gives no such option, do not treat a working dashboard keyboard as evidence that a hidden console toggle is missing.
Console input versus cloud input
Cloud play has its own browser requirements and compatibility list. Signing in at xbox.com/play through Edge or Chrome and selecting a cloud title that supports mouse and keyboard does not change the input support of a copy installed on your Xbox. Keep those two scenarios separate when checking a game description, troubleshooting a control, or deciding whether a peripheral purchase solves your problem.
How do you check whether Xbox can output 4K, 120 Hz, or VRR?
Check detection before changing any setting. The console’s 4K TV details page reports the capabilities it sees through the current HDMI connection.
- Open Settings.
- Choose General, then TV & display options.
- Open 4K TV details.
- Read the results for resolution, refresh rate, HDR, and other detected modes.
Use this screen as a connection diagnosis, not as a guarantee that every game supports every mode. A display marketed as 4K may accept 4K at 60 Hz but not 4K at 120 Hz. Some TVs expose 120 Hz only on a specific HDMI 2.1-capable input; others accept 120 Hz only when the resolution is reduced. A monitor’s headline refresh rate can also apply to DisplayPort while its HDMI input supports less. Xbox explains these limitations in its TV and display readiness guide.
If 120 Hz or VRR is missing, check the display manual for the exact HDMI port and for a setting sometimes described as enhanced, input-plus, or a similar high-bandwidth mode. Names vary by manufacturer and firmware, so do not infer capability from the TV’s marketing label alone.
Read every line in 4K TV details, not just the headline resolution. A useful interpretation is:
- 4K present, 120 Hz absent: the display or current path may be limited to 60 Hz at 4K, or the wrong HDMI input or mode may be selected.
- 120 Hz present at another resolution: the panel may accept high refresh only after reducing output resolution.
- VRR absent: confirm the display’s VRR range, port, firmware and any enhanced-input switch, then test without a receiver or switch.
- Capabilities change after rewiring: the previous cable, port or intermediate device was preventing full detection.
These results are specific to the active connection. Recheck the page after moving the cable, enabling a display-side mode, updating firmware or bypassing a receiver; do not rely on a result obtained from a different HDMI port.
How do you turn on 120 Hz on Xbox?
Select 120 Hz only when it is offered for the current display path. The option changes the console’s output refresh rate; it does not force a game to render at 120 frames per second.
- Open Settings > General > TV & display options.
- Choose Refresh rate.
- Select 120 Hz if it appears.
- Confirm the change and check the picture. If the display loses signal or behaves incorrectly, return to the menu and select 60 Hz.
Whether a game reaches 120 frames per second depends on its own performance mode, resolution, patches, and the console and display combination. Xbox’s latency explanation describes 4K transmission timing improving from 16.6 ms at 60 Hz to 8.3 ms at 120 Hz on supporting TVs; that is a frame-transmission figure, not a measured total input-lag result for every setup. See Xbox’s 120 Hz latency explanation.
If 120 Hz is available only at a lower resolution, decide whether smoother output or higher resolution matters more for the particular game. The console can expose a mode that the display accepts without that mode being the game’s best performance setting.
After selecting 120 Hz, check the game’s own graphics menu for a performance or 120-FPS mode. The console setting supplies the output opportunity; the title still determines its frame-rate target. If the game remains at 60 FPS, 120 Hz may still provide a compatible output cadence, but it cannot create additional rendered frames.
How do you enable Variable Refresh Rate (VRR)?
Enable VRR when the TV or monitor, HDMI input, cable, and any receiver or switch in the path all support it. VRR adjusts display timing to follow changing frame delivery, helping reduce judder or tearing when a game misses its target. It is not a method for turning a 60 Hz display into a 120 Hz display.
- Open Settings > General > TV & display options.
- Choose Video modes.
- Turn on Allow Variable Refresh Rate.
- Return to 4K TV details and confirm that the expected capability remains detected.
VRR and 120 Hz are related but independent capabilities. A display may support one without the other, or support both only at particular resolutions and inputs. Xbox’s guidance covers the complete path, including the display’s firmware and HDMI connection: Xbox TV and display readiness.
VRR is most useful when frame delivery varies inside the display’s supported range. It does not raise a game’s cap, repair unsupported bandwidth, or replace a 120 Hz panel. If the option is present but the image is unstable, disable it temporarily, test the same title at 60 Hz, and then isolate the display path before deciding whether to leave VRR off.
Dolby Vision is optional and adjacent. It is not a prerequisite for VRR or 120 Hz. Xbox notes that Dolby Vision gaming combinations, including VRR and up to 120 frames per second, depend on the TV and potentially its firmware; see the Dolby Vision gaming announcement.
What should you do if 120 Hz or VRR is not available?
Work from the least expensive and least disruptive checks to the most involved. Do not assume that a new cable or a defective TV is the answer until the existing connection has been verified.
- Check the HDMI input. Move the cable to the display port documented for 4K/120 or VRR. A different port may have lower bandwidth.
- Enable the display’s high-bandwidth mode. Look for the manufacturer’s enhanced-input setting and apply any required firmware update.
- Use the supplied cable first. On Series X, test the included Ultra High Speed HDMI cable before buying a replacement.
- Remove intermediate equipment. Connect the Xbox directly to the TV or monitor, bypassing an AV receiver, soundbar, splitter, or switch. If the mode appears, the intermediate device or its cable path is the limiting component.
- Reopen 4K TV details. Verify whether the detected capabilities changed after each adjustment.
- Try 60 Hz. If 120 Hz causes a blank screen or unstable image, select 60 Hz and then investigate the display path.
- Temporarily disable VRR for corruption. Xbox recommends turning off VRR when the image shows corruption or similar problems. Re-enable it after isolating the cause.
Change one thing at a time and record which setting produced a result. This makes it possible to identify whether the restriction is the display input, a cable, an intermediate receiver, firmware, or the console’s detected mode. Xbox’s troubleshooting recommendations are summarized in its display-readiness article.
Use a replacement cable only when the existing, direct path has been tested and cannot carry the required mode. For Series X, the supplied Ultra High Speed HDMI cable is the sensible baseline. A replacement does not compensate for a television port that supports only 60 Hz, a receiver that cannot pass VRR, or a monitor whose 120 Hz specification applies only to DisplayPort. Verify the limiting component before spending money.
What a blank screen tells you
A blank or unstable image after selecting 120 Hz is a signal-path problem until proven otherwise. Return to 60 Hz, reconnect directly, confirm the display input and enhanced mode, and check firmware. If 120 Hz then appears in 4K TV details, restore settings one at a time. If it never appears, the display may support 120 Hz only at another resolution or not through that HDMI input.
How do you calibrate the Xbox picture after setup?
Calibration can improve how the picture is tuned, but it cannot add an unsupported HDMI mode. Xbox provides two relevant tools under the setup section.
- Open Settings > General > TV & display options.
- Choose Setup.
- Select Calibrate TV for basic brightness, contrast, and picture guidance.
- Select Calibrate HDR for Games when HDR is supported and you want to tune game HDR output.
Run calibration after the connection and refresh-rate choices are stable. If 4K TV details does not show 4K/120 or VRR, calibration will not make those capabilities appear. Treat these tools as picture-tuning steps, not compatibility tests.
What is the difference between 120 Hz and 120 FPS?
120 Hz is the display-output refresh setting: the console sends up to 120 refresh opportunities per second when the connection supports it. 120 FPS is a game-rendering result controlled by the title’s engine, performance mode, resolution, and workload. A console can output at 120 Hz while a game renders at 60 FPS, 40 FPS, or another rate.
VRR can make changing frame rates look more consistent by allowing the display to vary its timing within its supported range. It still does not increase the game’s frame-production capability. Check the game’s own graphics or performance options for a 120-FPS mode, and treat Xbox’s refresh-rate menu as an output setting rather than a performance promise.
Xbox’s 2020 engineering explanation gives a useful timing comparison: at 4K, one 60 Hz refresh interval is 16.6 milliseconds, while 120 Hz cuts that transmission interval to 8.3 milliseconds on a supporting television. Those figures describe sending a frame to the display, not the total input latency you will experience with every controller, game, television mode or receiver.
Which connection should you choose for a monitor or TV?
Choose the connection that supports the exact combination you want: resolution, 120 Hz, and VRR. Compare the display’s HDMI specifications at the chosen resolution rather than relying on its maximum refresh-rate claim, which may refer to another input.
| Connection factor | What to verify | Why it matters |
|---|---|---|
| Display model | Supported resolution at 120 Hz and VRR range | Capabilities vary by model and mode. |
| HDMI input | Which port exposes high bandwidth or VRR | Not every input offers the same features. |
| Cable | Use the supplied Series X Ultra High Speed HDMI cable first | A weak or unsuitable path can hide modes. |
| Receiver or switch | Whether it passes the required resolution, refresh, and VRR | Intermediate hardware can limit detection. |
| Firmware | Current TV, monitor, and receiver firmware | Manufacturers may add or correct HDMI features. |
Buy a replacement cable only after confirming that the existing direct path and correct HDMI input cannot deliver the mode. The goal is a verified end-to-end connection, not a particular cable label in isolation.
Quick equipment comparison
| Item | Choose it when | Check first |
|---|---|---|
| Wired USB keyboard | You need dashboard navigation or a supported game’s keyboard controls | The title supports keyboard input; Xbox documents wired USB use |
| Wired USB mouse | The specific game or app implements mouse control | Mouse support is separate from keyboard navigation |
| Existing Series X cable | You are testing 4K/120 or VRR | Use it before purchasing a replacement |
| Replacement Ultra High Speed HDMI cable | The verified direct path still cannot deliver the mode | Confirm the cable, not the display port, is the restriction |
| New display | Your current model cannot provide the required resolution, 120 Hz and VRR combination | Exact HDMI-input specifications and firmware requirements |
What are the most common Xbox keyboard, mouse, VRR, and 120 Hz mistakes?
- Assuming every game supports mouse and keyboard: support is title-specific and limited to select games and apps.
- Confusing keyboard navigation with mouse gameplay: a keyboard may work around Xbox even when a game does not accept mouse input.
- Using a cloud support list for console play: cloud and locally installed console compatibility are separate.
- Reading “4K” as “4K at 120 Hz”: resolution and refresh support must be checked together on the exact HDMI input.
- Assuming 120 Hz means 120 FPS: the game must render at that rate.
- Leaving a receiver or switch in the chain while diagnosing: test the console directly to isolate the path.
- Changing several settings at once: adjust one item, revisit 4K TV details, and note the result.
- Using calibration as a compatibility fix: picture tools cannot create unsupported HDMI bandwidth or VRR.
- Buying a cable before checking the port: a display’s correct high-bandwidth input and enhanced mode matter as much as the cable.
- Treating Dolby Vision as required: HDR format support is adjacent to, not a prerequisite for, VRR or 120 Hz.
Frequently Asked Questions
Can I use a wireless keyboard and mouse on Xbox?
Xbox’s documented guidance specifically calls for wired USB mice and keyboards for navigation in select games and apps. Because support for other connection types and detailed console control paths is not established here, use wired USB devices when you need the documented setup.
Why does my TV show 120 Hz but Xbox only offers 60 Hz?
The TV may expose 120 Hz only on a particular HDMI input, at a different resolution, or with an enhanced-input setting enabled. Check the exact port, firmware, cable, and any receiver or switch, then revisit 4K TV details.
Does VRR improve a game locked to 60 FPS?
VRR can smooth timing when frame delivery varies within the display’s supported range, but it does not raise a game’s frame rate. A game capped at 60 FPS remains capped at 60 FPS unless its own software provides a higher-performance mode.
Should I buy a new HDMI cable to get 4K at 120 Hz?
Not automatically. First test the supplied Series X Ultra High Speed HDMI cable, the display’s correct high-bandwidth input, and a direct console connection; replace the cable only if the verified path still cannot deliver the required mode.
Can a 4K monitor run 120 Hz on Xbox?
Only if that monitor’s HDMI input supports 120 Hz at the selected resolution. A high refresh specification that applies to DisplayPort does not establish the same capability over HDMI. Check the exact model documentation and 4K TV details.
Why did VRR disappear after I changed HDMI ports?
VRR may be available only on a particular input or with an enhanced-input mode enabled. Reconnect to the documented port, update display firmware if needed, test directly from Xbox, and check 4K TV details again.
Does Xbox 120 Hz make every game run at 120 FPS?
No. 120 Hz is the console’s output refresh setting. The game must provide a compatible performance mode and render at that rate; otherwise it may remain at 60 FPS or another rate.
Is Dolby Vision needed for 120 Hz or VRR?
No. Dolby Vision is an optional HDR feature. Xbox describes combinations with VRR and up to 120 frames per second as dependent on the television and, potentially, its firmware.
What should I do if enabling VRR causes picture corruption?
Turn off Allow Variable Refresh Rate temporarily and test at 60 Hz. Recheck the HDMI input, cable, firmware and any receiver or switch, changing one item at a time before trying VRR again.
The Bottom Line
Use wired USB peripherals only with games and apps that document support. For video, trust 4K TV details, then set Refresh rate to 120 Hz and enable Allow Variable Refresh Rate only when the entire HDMI path supports them. Start troubleshooting with the correct display input, supplied Series X cable and a direct connection; calibrate the picture only after compatibility is established.